Aulic vanity checklist

Bathroom renovations stall when the Aulic vanity is locked from a single phone crop - width looks fine on screen, then the basin cutout, drawer swing or tapware finish refuses to sit with the cabinet under the same light. A showroom Aulic vanity checklist at Loganholme is the quiet visit that checks width, basin cutout, doors and drawers, and finish match to tapware before you order.

This guide is for Brisbane and Logan renovators who want a practical floor checklist for Aulic vanities - not guess millimetres, materials or warranty years. Confirm every dimension and supply note on the product page for your exact SKU. Live paths stay on the linked pages only: the What to check on an Aulic vanity blog, brand Aulic, vanities Brisbane, basins Brisbane, the Loganholme showroom and contact.

Truth from the floor: the Aulic re-works we see most often start with a width locked before waterproofing, a basin cutout guessed from a gallery crop, drawers that clash with a wall return, or black treated as a separate look from the matte-black finish family next to tapware. One checklist pass under Loganholme LEDs beats two returns after silicone cures.

Why an Aulic vanity checklist belongs in the renovation sequence

Open bathrooms put the vanity edge, basin rim and mixer spout in the same sightline. Cabinets that looked fine on separate product pages can fail when the finished wall is tighter than the stud bay, the bowl centreline sits off the mixer, or the door swing hits a shower screen. A showroom Aulic vanity checklist keeps four decisions in one pass:

• Width against the finished wall - measure the waterproofed clear span, not the rough opening alone.
• Basin cutout and pairing - confirm bowl type, cutout story and spout reach against the cabinet top.
• Doors and drawers - open every soft-close path next to returns, toilets and screens.
• Finish match to tapware - hold cabinet front and mixer samples together;

Deepen the companion notes with What to check on an Aulic vanity, then browse the range on brand Aulic. Brisbane context sits on vanities Brisbane and basins Brisbane.

Checklist item 1 - width at Loganholme

Width is the first gate. Bring a tape and the finished-wall figure (after waterproofing and tile returns if you have them). On the floor:

• Stand the Aulic cabinet selection against your clear-wall measurement - leave room for end panels, silicone and returns where the plan needs them.
• Compare wall-hung vs freestanding footprints only as mount stories you can see - confirm projection or fixing specs in this blog; confirm millimetres on each product page on the product page.
• For double-bowl plans, check that the cabinet width still leaves breathing room for two centres - confirm centres on the SKU page, not from memory.
• Photograph the waste stub and mark the cabinet ends on painters tape so the plumber and tiler share the same story.

Use brand Aulic and vanities Brisbane as navigation, then lock the exact SKU width on the product page before you pay.

Checklist item 2 - basin cutout and bowl pairing

Basin cutout mistakes show up after the top is cut or the bowl is bonded. At Loganholme:

• Hold the basin sample (or a clear product photo with dimensions open) on the cabinet top under showroom LEDs.
• Note whether the plan is undermount, above-counter or integrated - each changes spout reach and splash differently.
• Check bowl centreline against the mixer position you expect - confirm hole counts and cutout guidance on the product pages for both vanity and basin; confirm cut sheets here on the live product page.
• If the basin is still open, walk basins Brisbane after the cabinet width is chosen so the pair shares one elevation.

Companion depth: What to check on an Aulic vanity covers basin pairing habits without unpublished Aulic materials claims.

Checklist item 3 - doors and drawers

Soft-close paths fail when the room is tighter than the brochure crop. On the floor:

• Open every drawer and door fully next to a wall return, shower screen mock-up or toilet clearance on your plan.
• Check whether a full-extension drawer clears the skirt or kick before you lock the width.
• For wall-hung units, note toe-space and cleaning access with the doors open - confirm fixing and supply format on the product page; confirm assembly claims on the live product page.
• Write which doors/drawers you actually opened on paper so the invoice matches the floor pass.

If you cannot visit today, open brand Aulic and call us or use contact with your clearances - staff help you plan the floor pass rather than guessing swing over the phone.

Checklist item 4 - finish match to tapware

Cabinet fronts and mixers share the same sightline. Finish matching is part of the Aulic vanity checklist, not a separate errand:

• Hold the Aulic front (or colour chip) next to basin mixer and spout samples under Loganholme LEDs.
• Keep one primary finish family for tapware against the vanity - do not lock a second label from a different screen a week later.
• Warm timber-look or fluted fronts can pull cool or warm against gunmetal, brushed gold or matte black - judge under floor light, not only on a white phone background.

Browse Aulic cabinets on brand Aulic, then keep vanities Brisbane and basins Brisbane open while you choose bowls and mixers that share the same elevation story.

What to bring to Loganholme for the Aulic vanity checklist

Treat the visit like a short workshop, not a browse. Bring:

• Finished-wall width (after waterproofing if possible) and a tape measure.
• Phone photos of the waste stub, tile returns and any shower screen or toilet next to the vanity wall.
• Basin list notes (undermount, above-counter or integrated) and any bowl samples you already own.
• Tapware finish samples or mixer bookmarks so you can match finish to the Aulic front in one pass.
• A written preference for wall-hung vs freestanding - confirm mount details on the product page.

Plan the visit via the Loganholme showroom, or ask remaining questions through contact.

Floor sequence - run the four checks in one loop

1. Width first - clear wall vs cabinet list under showroom light.
2. Basin cutout next - bowl type and centreline against the cabinet top; open basins Brisbane if the bowl is still open.
3. Doors and drawers - full open next to returns and screens on your plan.
4. Finish match to tapware - vanity front and mixer samples together
5. Lock on paper - write SKU, width, basin pairing and finish family before you leave.

Re-read the What to check on an Aulic vanity article if you need deeper showroom habits, then return to brand Aulic to confirm the exact SKU.

How to choose (write before you pay)

1. Finished-wall width written and checked against the Aulic selection on the floor.
2. Basin cutout / bowl type confirmed against the cabinet top - product pages only for millimetres.
3. Doors and drawers opened fully against room clearances.
4. Tapware finish matched to the vanity front under Loganholme LEDs.
5. Companion blog read: What to check on an Aulic vanity.
6. Range bookmarked: brand Aulic.
7. Brisbane pages open: vanities Brisbane and basins Brisbane.
8. Visit planned or completed via showroom; remaining questions via contact.

Common Aulic vanity checklist mistakes to avoid

• Width from a stud photo only - waterproofing and tile returns shrink the clear wall.
• Basin cutout from a gallery crop - confirm cutout and hole layout on the product pages.
• Skipping drawer full-open - soft-close paths clash with returns after install.
• Tapware finish locked on a different day - match vanity and mixer under the same LEDs.
• guessing millimetres from memory - product page and manufacturer sheet win.

After the checklist - lock, then fulfil

Once width, basin cutout, doors/drawers and finish match to tapware sit clean under Loganholme LEDs, lock SKUs on paper, then choose fulfilment. Free Shop 4 pickup when stock is confirmed on the floor; Australia-wide delivery after you lock the set. Re-open brand Aulic if you need to re-check the range, keep What to check on an Aulic vanity bookmarked for companion habits, and use vanities Brisbane with basins Brisbane only as navigation - never as a substitute for the floor light test.

Visit, delivery and contact

Our showroom is at Shop 4, 1 Bryants Rd, Loganholme QLD 4129 (opening hours and directions), where you can see finishes in person and collect your order free once it is ready. We also deliver Australia-wide, with the exact rate shown at checkout (see delivery and returns). Questions? Call 07 3209 9644 or send us a message.

Related pages - Aulic vanity checklist links

• What to check on an Aulic vanity - companion showroom habits
• Brand Aulic - Aulic vanity and cabinet path
• Vanities Brisbane - Brisbane vanity page
• Basins Brisbane - Brisbane basin page
• Loganholme showroom - plan the checklist visit
• Contact - hours, phone and visit questions

FAQ - Aulic vanity checklist at Loganholme

Are black and matte black different looks next to Aulic fronts?
No. Choose them as one family when you match tapware to the vanity.

Where do I browse Aulic after the checklist?
Start with brand Aulic, keep the What to check on an Aulic vanity blog open, then use vanities Brisbane and basins Brisbane for local context.

Related shopping: vanities.

Take this checklist with you: shortlist Aulic vanities online and measure them against your plans at our bathroom showroom in Logan.