Bathroom renovation Brisbane showroom lead times stock twin recap
Lead times and stock language can look tidy as a single line on a notepad and still fall apart once vanity width, mixer clearance, glass hinge side and special-order SKUs sit under the same showroom LEDs - or the reverse, when freight is booked before floor-stock versus special-order wording is honest. This bathroom renovation Brisbane showroom lead times stock twin recap is the short Loganholme companion beside the longer lead times and stock recap. It is product and planning language only. It is not a stock guarantee, not a courier timetable, and not a substitute for your licensed plumber, builder or waterproofing contractor. It does not invent floor-stock claims, WELS stars, WaterMark licence numbers, courier day charts or coating microns.
Keep the primary recap open in bathroom renovation Brisbane showroom lead times and stock recap. Keep the deeper stock-language method open in bathroom renovation Brisbane lead times and showroom stock notes. Keep fulfilment language open on delivery and returns. Keep the SKU sequence open in bathroom renovation product order checklist Brisbane showroom. Confirm hours on Loganholme showroom and ask remaining questions via contact.
We write from Elenni at 1 Bryants Road, Loganholme QLD 4129 (phone 07 3209 9644, near M1 Exit 28). Confirm every stock line and lead-time note on the live product page with your licensed trades.
Brisbane & Logan pickup when stock is confirmed on the floor; Australia-wide delivery after you lock the fixture list that must land in the right install week.
Truth from the floor: the lead-times and stock swaps we re-work most often come from split decisions - a vanity width locked from a phone photo, a mixer lever clearance that never stood beside the basin under the same LEDs, and a special-order SKU booked as if it were confirmed floor stock. One twin lead-times-and-stock pass with stock notes, delivery-returns and product-order language open beats three late freight swaps after membrane week.
What this twin recap covers
Use this twin page when you already read the longer lead times and stock recap and need a shorter second pass under the same showroom LEDs. It keeps the companion recap, lead-times notes, delivery-returns, product-order checklist, showroom and contact in one short loop. It does not replace a product page, a set-out drawing, a stock confirmation email or any building approval.
On this site black and matte black are the same matte-black finish family unless a product page says otherwise. Do not treat "black" and "matte black" as two competing finish stories when you match tapware, showers, accessories and nearby hardware across the room that must clear the same install week.
Hours and NAP - only from the live contact page
Confirm every visit against the live contact page. As published there at the time of this twin recap:
- Address: 1 Bryants Road, Loganholme QLD 4129 (near M1 Exit 28)
- Phone: 07 3209 9644
- Monday, Tuesday, Wednesday, Friday: 9:00 am - 5:00 pm
- Thursday: 9:00 am - 6:00 pm
- Saturday: 9:00 am - 3:00 pm
- Sunday: Closed
Public holiday hours may vary - call ahead if unsure. Do not invent a second Brisbane CBD street address; Loganholme is the single showroom NAP.
Seven twin lead-times-and-stock paths - keep them on the correct page
- Primary recap: lead times and stock recap - full companion when floor stock versus special-order language still sits open beside the room sketch.
- Lead-times notes: lead times and showroom stock notes - deeper stock-language method before you chase one hero SKU.
- Delivery and returns: delivery and returns - pickup and Australia-wide delivery path without inventing transit days here.
- Product order: product order checklist Brisbane showroom - SKU sequence so each carton lands when the trade can install it.
- Floor: showroom to see vanity samples, mixers, showers and accessories beside the finish family under the same LEDs you will live with.
- Desk: contact for hours, phone and pickup questions before you lock freight against the wrong week.
- This twin: short second pass so stock language stays visible while you move from notes to a firm buy-and-freight list.
This twin recap does not invent specs or stock claims. Set-out drawings, labour allowances and install week stay with your licensed trades. It does not claim any product sequence makes a bathroom compliant on its own.
Bring list - twin lead-times-and-stock pass at Loganholme
- Phone photos of the wet zone and elevation, including niches, glass panels, shower stubs, bath footprint and any vanity or basin stubs already marked.
- A short note on which SKUs you already think are floor stock versus special-order - without inventing stock counts or courier day guesses on the phone.
- Any vanity width, mixer clearance, glass hinge or basin overflow notes your plumber or builder already shared.
- Rough delivery preference if known - pickup at Loganholme versus Australia-wide delivery - without inventing transit-day charts on the phone.
- A short list of finishes you already locked (tapware, shower, accessories if any) so black means matte black in the same matte-black finish family on the floor.
- Open tabs for the lead times and stock recap, lead times and showroom stock notes, delivery and returns and product order checklist.
Skip inventing freight-day or stock-count guesses at the desk. The twin pass is for comparing which fixtures must share a finish family and which stock language still sits open, not for writing a courier promise.
Floor flow before you lock the twin lead-times-and-stock list
Start at the vanity, basin and tapware samples with your room photos open. Stand a vanity width beside a basin and mixer sample in a similar finish family when both are on the floor. Look at how niches, glass and bath footprints claim space in your photos, then at which items must be decided before membrane week versus which trim and accessories can wait. Check how each path sits with your locked finish story - remembering black means matte black in the same matte-black finish family.
Next, walk the questions that still sit open: does any special-order SKU still need lead-time language before you treat it as floor stock, and does the product-order sequence still match what must arrive before install week? Keep purchase-order language clear so installers are not confused about what is confirmed on the floor versus what still waits on a supplier note. Keep those answers honest. If packing, waterproofing or freight details are unknown, do not invent a figure - take the open question to your licensed trades after the showroom visit, and confirm fulfilment language on delivery and returns.
Then open product order checklist Brisbane showroom only after the stock language is clearer, so the browse and buy sequence match what you saw. Confirm hours and pickup on showroom and contact before you leave. Keep the lead times and stock recap and lead times and showroom stock notes open so you are not re-arguing floor-stock wording online later.
Typical twin-pass traps we see on Brisbane and Logan jobs:
- Booking Australia-wide delivery for a special-order SKU as if it were confirmed floor stock, then discovering lead-time language after the tiler had already set height.
- Locking a vanity width from a hero photo while basin overflow, mixer clearance and glass hinge side still sit open beside the stock note.
- Choosing a coating as "black" on one visit and "matte black" as a different story on the next - they are the same matte-black finish family here.
- Skipping the lead times and stock recap or the lead times and showroom stock notes and re-arguing stock language online later.
- Ordering trim kits and accessories as if they were in-wall bodies (or the reverse) without keeping purchase-order language clear for your licensed trades.
- Inventing a courier day chart on a notepad instead of using the live delivery and returns path for pickup and freight questions.
After the twin lead-times-and-stock pass - order and fulfilment
When the fixture list and finish family are locked on the floor, confirm the live product page for the vanities, basins, mixers, showers and any matching accessories you chose. Do not invent finish microns, star ratings, stock counts or courier day charts in this twin recap. Your licensed trades own set-out, packing and waterproofing week. This page does not invent approval or certificate claims.
Brisbane & Logan pickup is available when stock is confirmed at Loganholme. Australia-wide delivery is arranged at checkout for jobs outside pickup reach - confirm carton handling at the desk, without inventing courier day charts here. Confirm hours and remaining questions on showroom and contact before you lock freight against the wrong week. Keep delivery and returns open so pickup versus freight stays on the published policy path.
Park catalogue sprawl: do not use /all or /shop as your lead-times, stock or fixtures path. Stay on the companion lead times and stock recap, the lead times and showroom stock notes, delivery and returns, the product order checklist, and this twin page.
Quick twin recap checklist
- Companion recap: lead times and stock recap.
- Lead-times notes: lead times and showroom stock notes.
- Delivery: delivery and returns.
- Product order: product order checklist Brisbane showroom.
- Floor: showroom at 1 Bryants Road, Loganholme QLD 4129 - phone 07 3209 9644.
- Desk: contact for hours and remaining questions.
- Fulfilment lock: Brisbane & Logan pickup when confirmed, or Australia-wide delivery when freight is arranged.
- Black means matte black in the same matte-black finish family unless a product page says otherwise.
- No invented floor-stock claims, courier day charts, CBD street address or regional shorthand the floor does not use.
Ready for the short second pass? Bring your room photos and open tabs to Loganholme, walk the twin lead-times-and-stock list under the same LEDs, then confirm pickup or Australia-wide delivery before you lock freight against the wrong SKU.
