Waterproofing timeline guide

A waterproofing calendar and a fixture delivery calendar can look settled on paper and still collide once wall mixer bodies, wastes and vanity widths sit under the same showroom LEDs - or the reverse, when cartons arrive before the membrane is closed and the tiler is waiting on a trim kit. This bathroom renovation waterproofing timeline guide is the short Loganholme notes beside the longer waterproofing timeline before fixtures guide. It is product and sequence planning only. It is not a waterproofing certificate, not a building-approval document, and not a substitute for your licensed waterproofing contractor, plumber or builder.

Keep the primary timeline walk open in waterproofing timeline before fixtures. Keep the deeper order notes open in bathroom renovation waterproofing and fixtures order Brisbane notes. Keep the SKU sequence open in bathroom renovation product order checklist Brisbane showroom and the stock questions open in lead times and showroom stock notes. Fulfilment path: delivery and returns. Confirm hours on Loganholme showroom and ask remaining questions via contact.

Free Shop 4 pickup when stock is confirmed on the floor; Australia-wide delivery after you lock the fixture list that must sit behind or through the membrane week.

Truth from the floor: the waterproofing-timeline swaps we re-work most often come from split decisions - a wall mixer body ordered after the wet area closed, a freestanding bath carton delivered before floor-waste set-out, and a vanity width that never stood beside the waste grate under the same LEDs. One guide waterproofing-timeline pass with trade notes and delivery timing open beats three late carton swaps against the wrong week.

What this guide covers

Use this guide page when you already read the longer waterproofing timeline before fixtures guide and need a shorter second pass under the same showroom LEDs. It keeps the companion timeline, waterproofing notes, product-order checklist, lead-times notes, delivery-returns, showroom and contact in one short loop. It does not replace a product page, a set-out drawing, a waterproofing specification or any building approval.

Confirm every visit against the live contact page. as published on the showroom page:

Seven guide waterproofing-timeline paths - keep them on the correct page

1. Primary timeline: waterproofing timeline before fixtures - full floor walk when membrane week and fixture delivery still sit open beside the room sketch.
2. Waterproofing notes: waterproofing and fixtures order Brisbane notes - deeper notes when wall mixers, wastes and vanity width still fight the closed wet area.
3. Product order: product order checklist Brisbane showroom - SKU sequence so each carton lands when the trade can install it.
4. Lead times: lead times and showroom stock notes - stock notes, special order and pickup readiness and confirm day charts here on the product page.
5. Floor: showroom to see mixer bodies, wastes, baths and vanity samples beside the finish family under the same LEDs you will live with.
6. Desk: contact for hours, phone and pickup questions before you lock freight against the wrong week.

Membrane details, set-out drawings and install week stay with your licensed trades. It does not claim any product sequence makes a bathroom compliant on its own.

Bring list - guide waterproofing-timeline pass at Loganholme

• Phone photos of the wet zone and elevation, including niches, glass panels, shower stubs, bath footprint and any waste or mixer stubs already marked.
• A short note on whether your waterproofing contractor has a closed-week target, or whether membrane timing is still open - product language only, not a certificate claim.
• Any wall-mixer body, waste grate, bath or vanity notes your plumber or builder already shared.
• A short list of finishes you already locked (tapware, shower, accessories if any) so on the floor.
• Open tabs for the waterproofing timeline before fixtures, waterproofing notes, product order checklist, lead times notes and delivery and returns.

Skip guessing cure-day or freight-day guesses at the desk. The comparison pass is for comparing which fixtures must clear the membrane week against real samples, not for writing a waterproofing certificate.

Floor flow before you lock the guide waterproofing-timeline list

Start at the tapware, waste and vanity samples with your wet-zone photos open. Stand a wall mixer body beside a waste grate and vanity sample in a similar finish family when both are on the floor. Look at how niches, glass and bath footprints claim space in your photos, then at which items must be decided before waterproofing closes versus which trim and accessories can wait. Check how each path sits with your locked finish story - remembering

Next, walk the questions that still sit open: does the wall mixer body need to sit behind the membrane while the trim kit waits for tile, and does the freestanding bath still favour floor-waste set-out before the carton arrives? Keep purchase-order language clear so installers are not confused about what must arrive before membrane week. Keep those answers honest. If set-out, packing or waterproofing details are unknown, confirm a figure - take the open question to your licensed trades after the showroom visit on the product page.

Then open product order checklist Brisbane showroom and lead times and showroom stock notes only after the decision list is clearer, so the browse and stock questions match what you saw. Confirm hours and pickup on showroom and contact before you leave.

Typical guide-pass traps we see on Brisbane and Logan jobs:

• Locking a vanity width from a hero photo while the waste grate and floor fall still sit open beside the membrane week.
• Choosing a coating as "black" on one visit and "matte black" as a different story on the next - they here.
• Arranging Australia-wide delivery for a wall mixer body after waterproofing already closed, then discovering the body needed to sit behind the membrane.
• Skipping the waterproofing timeline before fixtures or the waterproofing notes and re-arguing sequence online later.
• Ordering trim kits and accessories as if they were in-wall bodies (or the reverse) without keeping purchase-order language clear for your licensed trades.

After the guide waterproofing-timeline pass - order and fulfilment

Read the fulfilment path on delivery and returns before you lock freight against the wrong week.

Park catalogue sprawl: do not use /all or /shop as your waterproofing-timeline or fixtures path. Stay on the waterproofing timeline before fixtures, the waterproofing notes, the product order checklist, the lead times notes, delivery and returns, and this guide page.

Quick guide checklist

• Companion timeline: waterproofing timeline before fixtures.
• Waterproofing notes: waterproofing and fixtures order Brisbane notes.
• Product order: product order checklist Brisbane showroom.
• Lead times: lead times and showroom stock notes.
• Fulfilment: delivery and returns.
• for hours and remaining questions.

Next step: open the waterproofing timeline before fixtures, confirm hours on contact, then walk the showroom with the waterproofing notes, product order checklist, lead times notes and delivery and returns open before you lock the cart. Pair with this guide so the second waterproofing-timeline pass stays short and defensible with your trades.

Related shopping: tapware | vanities.

Visit, delivery and contact

Our showroom is at Shop 4, 1 Bryants Rd, Loganholme QLD 4129 (opening hours and directions), where you can see finishes in person and collect your order free once it is ready. We also deliver Australia-wide, with the exact rate shown at checkout (see delivery and returns). Questions? Call 07 3209 9644 or send us a message.