Bathroom renovation Brisbane showroom: waterproofing timeline before fixtures

Waterproofing calendars and fixture delivery calendars collide on Brisbane renovations when cartons arrive before the membrane is closed - or when the tiler is waiting while a wall mixer body is still on a truck. This bathroom renovation Brisbane showroom waterproofing timeline before fixtures guide is a practical Loganholme companion for sequencing waterproofing work ahead of fixture delivery. It is not a waterproofing certificate, not a building-approval document, and not a substitute for your licensed waterproofing contractor, tiler, plumber or builder.

Pair this timeline with the order notes in bathroom renovation waterproofing and fixtures order Brisbane notes, the buy sequence in bathroom renovation product order checklist Brisbane showroom, and the stock questions in bathroom renovation Brisbane lead times and showroom stock notes. Confirm freight language on delivery and returns, walk samples at the Loganholme showroom, then ask desk questions via contact.

We write from Elenni at 1 Bryants Road, Loganholme QLD 4129 (M1 Exit 28). We do not invent Standard clause numbers, membrane brand codes, cure-day charts, lead times, stock counts, courier day promises or trade pricing. Confirm every waterproofing and product figure with your licensed trades and on the product page.

Brisbane & Logan pickup when stock is confirmed on the floor; Australia-wide delivery after you lock the fixture set that must arrive after the membrane stage.

What this waterproofing timeline page covers

Fact: renovators often order vanity, bath, mixer and toilet as soon as finishes look locked, then discover the waterproofing contractor still needs set-out for wastes, mixer bodies and niche depths before the membrane closes.

Truth from the floor: visitors who photograph a freestanding bath and a wall mixer under Loganholme lights, then schedule delivery for the same week the membrane starts, often pay for storage or site congestion. Forty minutes aligning a waterproofing-before-fixtures timeline beats a carton sitting in a hallway while the tiler waits for a grate decision.

This post covers practical showroom planning language only. On this site black and matte black are the same matte-black finish family - never contrast them as different looks between tapware, wastes and accessories while you sequence orders.

Why waterproofing sits before fixture delivery

Waterproofing creates the wet-area envelope. Fixtures that pierce, sit on or drain through that envelope need their set-out locked before the membrane is closed - not after cartons arrive as a surprise.

• Floor wastes and falls - grate size and position must match the fall plan before the membrane and screed story closes.
• Wall mixer bodies and shower outlets - rough-in depth and body location sit behind the membrane; late SKU changes force reopen work your waterproofing contractor owns.
• Niche depth and shelf set-out - tile and waterproofing meet at the niche; accessory rails can wait, but niche geometry cannot.
• Bath and vanity footprints - freestanding baths and vanity plinths change floor waste location and wall penetrations; confirm footprints before promising a delivery week.

Read the companion order notes in waterproofing and fixtures order Brisbane notes before you lock a courier date on delivery and returns.

Practical timeline - showroom decisions before the membrane week

Use this as a conversation order with your builder and waterproofing contractor. We do not invent day counts; your trades set cure and inspection timing.

1. Lock wet-area geometry - shower size, niche, bath or shower-over-bath choice, vanity width - with photos and millimetres from the showroom visit.
2. Lock penetrating fixtures - wall mixer body, shower outlet, floor waste grate family, bath filler if it pierces the deck - shortlist SKUs before membrane close.
3. Ask stock language - standard line versus special-order - using lead times and showroom stock notes so you do not promise a waterproofing date against an unconfirmed special-order.
4. Sequence the buy - follow product order checklist Brisbane showroom so tapware bodies and wastes land when the plumber needs them, not when the hallway is full.
5. Schedule delivery after set-out - use delivery and returns for freight and pickup rules; keep bulky vanity and bath cartons off site until the waterproofing stage that needs them is named by your builder.
6. Hold finish family steady - matte black stays one family on this site when you match wastes, mixers and accessories across staged deliveries.

What must be decided before waterproofing closes

These are showroom and plan decisions, not product marketing claims. Bring them to Loganholme on paper.

• Waste grate size and finish family - photograph against tile samples under showroom LEDs.
• Mixer body and outlet positions - plumber rough-in notes plus the display you stood next to at the Loganholme showroom.
• Bath or shower tray footprint - taped outline on site beats catalogue memory.
• Vanity width and plumbing rough-in - wall-hung brackets and waste alignment before wall linings close.
• Toilet suite clearances - leave Standard and NCC detailing to your licensed trades; we do not invent clearance codes here.

Desk follow-up: contact - phone 07 3209 9644.

What can wait until after waterproofing and tiling stages

Some lines are finish and accessory work that do not pierce the membrane. Staging them later reduces site damage and storage pressure.

• Surface-mounted accessories - towel rails, robe hooks, toilet-roll holders once tile is complete and silicone is settled per your tiler.
• Mirrors and shaving cabinets - after wall finishes and power points are confirmed with your electrician.
• Loose tapware trim kits - when the body is already in the wall and the waterproofing contractor has closed around the penetration.
• Decorative shelves that do not change niche geometry - after the niche itself is waterproofed and tiled.

Keep the staged list aligned with product order checklist so late accessories do not reopen early decisions.

Decision case 1: wall mixer body before membrane vs trim after tile

The body sits in the wall before waterproofing closes. The trim plate and cartridge handle can arrive later. Ordering the full visible set in one carton is fine only when storage and site timing allow - the body date still belongs on the waterproofing timeline.

• Confirm body depth language with your plumber before you promise a membrane week.
• Match trim finish to the same matte-black or chrome family you approved under showroom lights.
• Cross-check stock notes in lead times and showroom stock notes.

Decision case 2: freestanding bath delivery vs floor waste set-out

A freestanding bath carton arriving before the floor waste and fall are locked creates storage and handling risk. Set-out first; delivery when your builder names the stage that needs the bath on site.

• Photograph bath footprint against the display at Loganholme showroom.
• Align waste grate finish with tapware before you book freight on delivery and returns.
• Re-read waterproofing and fixtures order notes for bath-versus-waste order language.

Decision case 3: vanity and basin after walls vs early special-order

Special-order vanities need earlier buy decisions, but the carton still should not sit through demolition and membrane weeks unless your builder has dry storage. Ask stock language early; schedule delivery late.

• Use lead times and showroom stock notes for the questions to ask on the floor.
• Keep basin and mixer finish as one family - black and matte black stay the same matte-black finish family on this site.
• Fulfilment: Brisbane & Logan pickup when confirmed, or Australia-wide delivery timed to the install stage.

What to bring for a waterproofing-timeline showroom visit

• Builder or waterproofing contractor notes on membrane stage and inspection holds - we do not invent hold points.
• Floor plan or phone photos with tape measure in shot for shower, bath and vanity.
• Tile or paint samples for waste and mixer finish matching under one LED bank.
• A simple two-column list: must decide before membrane versus can arrive after tile.
• Questions from product order checklist and lead times notes.

Loganholme next steps

Walk wastes, mixers and bath footprints under the same lights, then write the waterproofing-before-fixtures order on one page before anyone books a courier.

• Waterproofing and fixtures order Brisbane notes - companion order language.
• Product order checklist Brisbane showroom - buy sequence after finishes lock.
• Lead times and showroom stock notes - stock questions without invented day charts.
• Delivery and returns - pickup and freight rules.
• Loganholme showroom at 1 Bryants Road, Loganholme QLD 4129 | contact | phone 07 3209 9644.

Brisbane & Logan pickup when stock is confirmed; Australia-wide delivery when the waterproofing timeline says the fixture stage is ready. On this site black and matte black are the same matte-black finish family.

Related shopping: tapware.

Related shopping: vanities.