Bathroom renovation budget Brisbane showroom planning notes

The quote looked tidy until the tile board, the vanity width and the shower rail were in the same room. Then the contingency line vanished into a second mixer finish, a deeper basin and a glass hinge side nobody had measured. Budget stress on a Brisbane bathroom renovation is rarely one big number - it is the stack of late swaps after waterproofing closed.

This guide covers bathroom renovation budget planning notes - how to group fixture spend, what to verify on the floor before you order, and how to keep contingency for the surprises that show up in millimetres, not mood boards. Confirm every SKU price and rating on the product page and with your builder.

Screenshots hide the contingency line

Fact: a renovation budget needs room for fixture groups, site labour and a contingency for geometry that only appears when the vanity, mixer and glass sit under the same light.

Truth from the floor: the budgets we re-work most often locked a vanity width from a photo, then discovered the basin overflow and mixer lever needed a deeper top. Twenty minutes at the Loganholme showroom with a room sketch beats a late fixture swap. Pair this article with the order-of-work notes in our bathroom renovation checklist and the stage map in bathroom renovation timeline Brisbane from showroom visit to install.

Group the budget before you chase a single SKU

Think in fixture groups, not one hero product. A typical wet-area set for Brisbane and Logan renovations includes vanity and basin, tapware and shower controls, shower rail or rain head, wastes, accessories and mirrors. Each group has its own product-page price, and each group can drift if finish families are mixed late on the live product page.

Write the groups on one page before you visit. Note which items must share a finish family, which items need plumber rough-in confirmation, and which items can wait until after tiling samples are locked. The bathroom buying guides hub collects WaterMark, WELS, vanity sizing and finish-care pages so you can brief the visit and confirm specs on the product page.

Showroom planning notes that protect contingency

At Loganholme we encourage you to stand the vanity sample next to the mixer and shower rail under the same LEDs. Check lever clearance against the glass hinge side, basin depth against the top thickness, and whether the shower arm clears the screen header. Soft-cloth care and coating notes belong on the product page.

Bring: room sketch with millimetres, tile sample or board photo, glass hinge side note, plumber rough-in depth, and a list of finish families (not a single locked SKU). Directions and hours: directions | contact | showroom. Visit context: bathroom showroom Brisbane.

Where budgets usually drift after the visit

• Finish family split: basin mixer in one coating, shower rail in another - re-match via shop by finish before you order.
• Vanity width vs door swing: measure again on the floor; sizing notes live in the vanity guides linked from bathroom buying guides.
• Shower set vs separate wall mixer: decide with a niche sketch - see related wet-area notes after you lock the control path.
• Waste and fall: grate size and floor fall are site decisions; confirm with your tiler and plumber, not from a mood board.

A practical budget checklist for the Loganholme visit

Use this as a planning list, not a price sheet:

1. List fixture groups and which ones must share a finish family.
2. Mark which items need rough-in confirmation before waterproofing.
3. Leave a contingency line for geometry surprises (depth, hinge side, rail reach).
4. Confirm every WELS and WaterMark marking on the product page for the exact SKU.
5. Decide pickup vs delivery only after the SKU set is locked - not before.

Order of work and stage timing still sit in the renovation timeline from visit to install and the bathroom renovation checklist. This article is about protecting the contingency line with showroom checks - not guessing dollar bands.

Items that are often sold separately

Budgets drift when a line item turns out to need a second part. These are the common ones in our range, taken from the supplier details on each product page:

• Vanity basins and wastes: many Otti vanity listings note that basins and pop-up wastes are sold separately, and some note that tapware, mirror and legs are separate too. Check the "sold separately" line on the vanity you choose.
• Bath plug and waste: ADP baths list plug and waste as not included and suit a 40mm waste. Pietra Bianca lists an optional overflow drain and matching stone drain cover at additional cost.
• In-wall mixer bodies: some wall and shower mixers are sold as a trim kit only, so the in-wall body is a separate line. Check the title and description before your plumber does the rough-in.
• Heated towel rail wiring: many Radiant rails come plug-in or hard-wired with a concealing kit. Hard-wiring is done by a licensed electrician, which belongs in the trade budget.
• Floor grate puddle flange: Radiant lists the puddle flange as not included on its floor grates.

Bring your list to our Loganholme showroom and we can check each line against the product details with you.

Visit, delivery and contact

Our showroom is at Shop 4, 1 Bryants Rd, Loganholme QLD 4129 (opening hours and directions), where you can see finishes in person and collect your order free once it is ready. We also deliver Australia-wide, with the exact rate shown at checkout (see delivery and returns). Questions? Call 07 3209 9644 or send us a message.

Related reading before you lock spend

Planning hub: bathroom buying guides. Checklist: bathroom renovation checklist. Timeline: bathroom renovation timeline Brisbane from showroom visit to install. Showroom: Loganholme showroom | bathroom showroom Brisbane.

Visit and shop next steps

Shop and guides: vanities | tapware | showers | shop by finish | bathroom buying guides.

Bring your room sketch, tile sample and contingency questions to our Loganholme showroom. Group the fixture spend, confirm every SKU on the product page, then lock the set so install week is about fitting what you documented - not rewriting the budget after the waterproofing closed.