• Advice
  • Bathroom
  • Brisbane
  • Gold Coast
  • Loganholme
  • Showroom
  • Visit
  • Loganholme bathroom showroom visit from Brisbane and Gold Coast

    Sep 19, 2026

    You shortlisted mixers, a vanity width and a shower set online. Under phone light the finishes looked close enough. On install day the brushed nickel reads cool next to warm tile, the spout misses the bowl centre, or the robe hooks do not match the rail. That miss usually means the samples never stood together under the same LEDs - not a late freight delay.

    This guide covers a Loganholme bathroom showroom visit from Brisbane and Gold Coast - how to reach Elenni at 1 Bryants Road, Loganholme QLD 4129 (phone 07 3209 9644, M1 Exit 28), what to bring, and how to lock sizes and coatings before waterproofing. One NAP serves Brisbane, Logan and Gold Coast shoppers. We do not invent opening-hour exceptions, stock counts, hole diameters or WELS star ratings here. Confirm hours on the day via contact and every figure on the product page.

    Brisbane & Logan pickup when stock is confirmed on the floor; Australia-wide delivery after you lock the set. Gold Coast visitors are welcome on the floor - pickup stays Brisbane and Logan. Plan via the Loganholme showroom, bathroom showroom Brisbane, bathroom showroom Gold Coast and the bathroom hub.

    Why visit Loganholme before you lock the bathroom cart

    Online listings show angles and finishes. The floor shows how coatings sit beside your tile, how a vessel mixer clears a raised bowl, and whether a wall-hung vanity drawer clears the toilet cistern. Twenty minutes with samples in hand at Loganholme beats another carton of near-miss hardware.

    • Finish family: hold mixer, rail, waste cover and robe hooks under the same LEDs. Map coatings on shop by finish.
    • Size and projection: vanity width, bath rim height and shower rail reach need taped photos or a room sketch - not a phone zoom.
    • Pairing: basin mount type drives mixer height; bath shape drives filler vs wall spout. Browse categories via the bathroom hub.
    • Stock honesty: ask staff to confirm what is on the floor for Brisbane & Logan pickup versus freight for Australia-wide delivery.

    Start planning on bathroom showroom Brisbane if you drive from the city side, or bathroom showroom Gold Coast if you come up the M1 from the coast. Both landers point to the same Loganholme NAP.

    Getting there from Brisbane

    From Brisbane CBD and southern suburbs, follow the M1 south to Exit 28 (Loganholme / Bryants Road). The showroom sits at 1 Bryants Road, Loganholme QLD 4129. Allow peak-hour buffer on weekday mornings and Friday afternoons. Phone 07 3209 9644 if you need staging for a bulky vanity or bath before you arrive.

    • Open directions for parking and approach notes.
    • Use bathroom showroom Brisbane for local visit context, then the live floor page at showroom.
    • Bring order confirmation if you are collecting after online checkout - free showroom pickup when we confirm the order is ready.

    Pickup after the visit remains Brisbane & Logan pickup only when stock is confirmed. We do not invent metro depot addresses outside Loganholme.

    Getting there from the Gold Coast

    Gold Coast renovators are welcome on the Loganholme floor. Drive the M1 north to the same Exit 28. There is no separate Gold Coast street NAP - Elenni serves GC shoppers from Loganholme. Use bathroom showroom Gold Coast to plan the trip, then confirm hours via contact.

    • Serve GC on the floor: compare finishes, glass and vanity samples in person.
    • Pickup lock: collection is still Brisbane & Logan pickup when stock is ready - not a Gold Coast depot.
    • Freight: Australia-wide delivery after you lock SKUs, including Gold Coast street delivery when freight is arranged - detail on delivery and returns.

    Pair the GC lander with the main Loganholme showroom page so hours and address stay in one place.

    What to bring to the showroom

    A short visit works when you arrive with decisions ready to test:

    • Room sketch or taped wall photos with millimetres for vanity width, niche depth and bath clearances.
    • Tile, stone or paint offcuts so coatings sit beside real materials under showroom LEDs.
    • Plumber or builder notes on hole count, waste position, rough-in depth and hinge side for glass.
    • Shortlist links from the bathroom hub - tapware, vanities, showers, basins and baths.
    • Phone photos of existing mixers or rails if you are matching an existing finish family.

    Staff can walk you through tapware, vanities, showers, basins and baths once you have the sketch open. Confirm every millimetre and compliance note on the product page - this blog does not invent specs.

    How a typical floor walk runs

    Most Brisbane and Gold Coast visitors cover the board in this order:

    1. Lock vanity width and basin mount under LEDs, then choose mixer height and spout reach.
    2. Stand shower mixer and rail beside tile samples; check glass hinge side if a screen is in scope.
    3. If a freestanding bath is on the list, check rim height, filler vs wall spout and floor waste access.
    4. Match accessories - rails, hooks, toilet-roll holders - to the same coating family on shop by finish.
    5. Ask for stock confirmation: Brisbane & Logan pickup timing, or freight quote for Australia-wide delivery.

    Browse the category overview on the bathroom hub, then return to showroom for hours and address. City-side context: bathroom showroom Brisbane. Coast-side context: bathroom showroom Gold Coast.

    Pickup, delivery and what we do not invent

    After you lock SKUs on the floor:

    • Brisbane & Logan pickup - free showroom collection at 1 Bryants Road when we confirm the order is ready. Choose pickup at checkout.
    • Australia-wide delivery - freight after you lock the set; read delivery and returns for process notes.
    • We do not invent Gold Coast street addresses, WELS star counts, WaterMark licence numbers, hole centres or stock ETA days in this article. Confirm on the product page and with staff.

    Phone 07 3209 9644 | contact | directions.

    Related landers and hubs

    Showroom paths: Loganholme showroom | bathroom showroom Brisbane | bathroom showroom Gold Coast | bathroom hub.

    Categories: tapware | vanities | showers | basins | baths.

    Address: 1 Bryants Road, Loganholme QLD 4129 (M1 Exit 28). Phone 07 3209 9644.

    FAQ - Loganholme visit from Brisbane and Gold Coast

    Can Gold Coast shoppers visit the showroom?

    Yes. Drive the M1 north to Exit 28 and visit Elenni Loganholme. Plan via bathroom showroom Gold Coast. Pickup remains Brisbane & Logan pickup; freight covers Australia-wide delivery.

    Where do Brisbane visitors park and enter?

    Use M1 Exit 28 to 1 Bryants Road, Loganholme QLD 4129. Parking and approach notes: directions. Local lander: bathroom showroom Brisbane.

    What should I open online before I drive?

    Start at the bathroom hub, shortlist categories, then confirm hours on showroom. Bring tile offcuts and a millimetre sketch.

    Do you invent stock ETA or compliance numbers here?

    No. Confirm stock, WELS and WaterMark text on each product page and with floor staff. This guide does not invent figures.

    How do pickup and delivery work after the visit?

    Brisbane & Logan pickup when stock is confirmed; Australia-wide delivery after you lock the set. Detail: delivery and returns. Phone 07 3209 9644.


    More from > Advice Bathroom Brisbane Gold Coast Loganholme Showroom Visit