Phoenix tapware Brisbane showroom range notes

The mixer looked right on a phone crop until the spout sat short of the vessel bowl and the wall mixer trim did not match the basin lever. Tapware mistakes rarely fail on the brochure - they fail when the vanity is already fixed and the plumber is scheduling a return visit for a different rough-in or cartridge path.

These Phoenix tapware range notes help renovators compare Phoenix families on the floor at Elenni. We write from Loganholme) - one address for Brisbane and Logan shoppers, with Australia-wide delivery after you lock the set. Confirm dimensions, WaterMark, WELS and care notes on each product page and the manufacturer sheet linked there.

The gallery crop and the spout reach disagreed

Fact: Phoenix expands tapware choice at Elenni across basin mixers, vessel mixers, wall mixers, bath outlets and kitchen mixers. Product families on the live brand path include lines such as Cromford, Vivid, Axia, Lexi, Gloss, Nuage, Teel, Vask and Wiltern - labels and gallery crops are useful starting maps, not a substitute for holding the body under showroom LEDs next to your tile and vanity sample.

Truth from the floor: the sets we re-work most often locked tile and vanity first, then ordered a mixer from a single phone crop. Twenty minutes at the Loganholme showroom with your plan, a tape and Phoenix samples open beats another late swap. Pair this article with Phoenix brand guide, the brand path brand Phoenix, the Brisbane page bathroom tapware for Brisbane, and compliance notes in WaterMark and WELS buying notes.

What to check on the showroom floor

Bring the decision down to checks you can do with your hands and eyes:

• Family match across the wet area: keep basin, wall and bath pieces in the same Phoenix family where the plan calls for one elevation - confirm which SKUs sit together on the product page, not from memory.
• Spout reach vs bowl: vessel bowls need taller or longer spouts than undermounts. Hold the mixer next to the basin sample before you order.
• Wall vs deck mount: wall mixers need confirmed rough-in depth; deck mixers need hole centres and bench thickness. Compare paths in basin mixers and wall mixers.
• Finish under LEDs: brushed nickel, chrome, matte black and bronze tones shift under warm vs cool light - wipe samples with a soft cloth and stand where morning light hits your bathroom.
• WaterMark and WELS labels: Australian bathroom mixers should carry WaterMark certification, and a WELS rating where the product type requires it.
• Care and coating notes: PVD and electroplated paths clean differently. Read care lines on the listing, then open Caring for PVD tapware finishes if the page names PVD.

Shop the wider tapware map via cat-tapware and the brand path brand Phoenix. Brand overview: Phoenix brand guide.

Phoenix paths that belong beside a selection

Use collections as navigation, then confirm the exact SKU on the product page.

• Brand Phoenix - full Phoenix tapware path on site.
• Cat-tapware - all tapware including other ranges for side-by-side finish checks.
• Basin mixers - deck and vessel basin outlets.
• Wall mixers - wall-mounted mixers and trim kits when rough-in is already set.
• Bath tapware - bath spouts and freestanding bath mixers.
• Kitchen tapware - sink and pull-out mixers when the kitchen shares a finish story.
• Showers and accessories - matching rails, outlets and hooks when the elevation needs them.

Brisbane context: bathroom tapware for Brisbane. Finish hub: shop by finish. Finish comparison: tapware finish comparison.

Range notes without unpublished specs

Phoenix families on our floor are organised by product line - Cromford, Vivid, Axia, Lexi, Gloss, Nuage, Teel, Vask and Wiltern appear across basin, vessel, wall and kitchen listings on the live brand path. Confirm millimetres, WaterMark, WELS and care notes on the product page for your exact SKU, then cross-check with your plumber.

Floor habits that help: photograph the rough-in depth, mark spout reach on painters tape against the basin, bring a tile offcut, and open the same family in more than one finish under the showroom LEDs. Compliance walk-through: WaterMark and WELS buying notes. Guides: WaterMark guide | WELS guide.

What to bring to Loganholme

• Plan or taped photos of vanity, basin type and wall returns.
• Tile or benchtop offcut for finish comparison under LEDs.
• Notes on deck vs wall mount and any plumber rough-in depths.
• A list of Phoenix family names you want to hold side by side.

Visit, delivery and contact

Our showroom is at Shop 4, 1 Bryants Rd, Loganholme QLD 4129 (opening hours and directions), where you can see finishes in person and collect your order free once it is ready. We also deliver Australia-wide, with the exact rate shown at checkout (see delivery and returns). Questions? Call 07 3209 9644 or send us a message.

Related pages

Warranty overview: warranty - terms are set by Phoenix per product; confirm on the product page.

Next steps

Shop: brand Phoenix | Phoenix brand guide | tapware | tapware Brisbane. Compliance: WaterMark and WELS buying notes | WaterMark guide | WELS guide.

Browse all Phoenix tapware online, then compare the finishes under real light at our bathroom showroom in Logan.